CẢM BIẾN QUANG ĐIỆN TAKEX PXB-50HF 100HF 200HF SERIES
CẢM BIẾN QUANG ĐIỆN TAKEX PXB-50HF 100HF 200HF SERIES
PHOTOELECTRIC BEAM SENSOR ( QUAD BEAM )
Công ty Ngân Anh Phát chúng tôi chuyên phân phối và cung cấp các dòng sản phẩm chính hãng cảm biến quang điện loại 4 chùm tia PXB-50HF 100HF 200HF Series từ nhà sản xuất Takex xuất xứ Japan
Các tính năng của dòng PXB-50HF 100HF 200HF Series
+ 4 chùm tia với công suất cao
+ Lựa chọn 4 kênh chùm tia khác nhau để tránh gây nhiễu sóng
+ Khả năng miễn dịch với ánh sáng cực tốt
+ Các chùm tia tách xa nhau để giảm thiểu báo động sai
+ Bảo vệ chống sét lên đến 15kV
+ Bảng mạch giám sát môi trường xung quanh
+ Miễn nhiễm với ánh sáng mặt trời 50.000 lux
+ Thiết kế theo tiêu chuẩn IP65
Model:
PXB-50HF
PXB-100HF
PXB-200HF
Thông số dòng cảm biến quang điện loại 4 chùm tia PXB-50HF 100HF 200HF Series:
Model | PXB-50HF | PXB-100HF | PXB-200HF |
Detection system | Simultaneous breaking of 4 beams | ||
Infrared beam | LED pulsed beam, Double modulation | ||
Protection distance | Outdoor 50m or less Indoor 100m or less | Outdoor 100m or less Indoor 200m or less | Outdoor 200m or less Indoor 400m or less |
Max. beam range (approx.) | 500m | 1000m | 2000m |
Response time | 50msec. to 700msec. (Variable at pot) | ||
Supply voltage | 12V to 30VDC (Non-polarity) | ||
Current consumption | 30mA or less | 32mA or less | 34mA or less |
Alarm output | Dry contact relay output form C Contact action : Interruption time + delay time (2 sec.) Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor | ||
Environmental output | Dry contact relay output form C Contact action : Output when environmental conditions worsen Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor | ||
Tamper output | Dry contact relay 1b Contact action : Activated when TX/RX cover is detached Contact capacity : 30V (AC/DC) 0.1A (resistive load) Protective resistor | ||
Alarm LED | Red LED (Receiver) ON : when an alarm is initiated | ||
Sensitivity attenuation LED | Red LED (Receiver) ON : when beam reception is attenuated | ||
Functions | Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/Lower beam switch, Wireless checker | ||
Ambient temperature range | - 35°C to +66°C | ||
Beam adjustment | Horizontal : ±90°, Vertical : ±20° | ||
Mounting positions | Indoor / Outdoor | ||
Wiring | Terminals | ||
Weight | Transmitter : 1400g / Receiver : 1470g | ||
Appearance | PC resin (wine red) |